Google+   Facebook   In   twitter   Youtube
  Plastic Testing Instruments
Melt Flow Index-Deluxe
Melt Flow Index Tester- NXG Model
Computer Based Tensile Testing Machine -Zeus Ultimo
Tensile Tester -Digital
MagnaMike 8600-Thickness Gage Testing
Conditioning Chamber / Humidity Chamber
Hot Air Oven
Hot Air Oven Computerized
Moisture Analyzer
IZOD/CHARPY Impact Tester -Digital
CO-Efficient of Friction Tester (Dynamic Model)
Heat Sealer
Environmental Stress Cracking Resistance - E.S.C.R
Peel Strength / Seal Strength Tester Digital
Heat Deformation Tester
Drop Tester
Carbon Black Dispersion Test Apparatus
Carbon Black Content Apparatus
Vibration Table
Transparency Tester
Dart Impact Tester
Colour Matching Cabinet - Spectrum Euro
Digital Color Matching Device
Ultra Low Deep Freezer
Digital Specific Gravity Balance
Illuminated Magnifiers
Digital Tensile Testing Machine Cap 2500KG
Notch Cutter (Motorised) For Impact Tester
Shore D Hardness Tester-Digital Model
Tensile Testing Machine Computerized-Zeus Ultimo  
Computer Based Tensile Testing Machine -Zeus Ultimo
Model No:  PST-293
The Presto Computerized Tensile testing machine is widely used for evaluating the tensile strength of plastic products, pet bottles and various other products. The equipment has a capacity of 250 Kgf with a least Count of 100 gm. It is a floor standing model of C.R.E. Type fabricated using heavy duty Mild steel. The Presto Computerized Tensile testing machine is must have for all plastic and plastic product manufacturing units.
Product Rating:     Presto (rate this product)     |    Facebook Feedback     |    Print Print     |    Presto Tell a Friend

Tensile Testing Machine

The Presto Computerized Tensile testing machine offers a grip to grip separation between 25mm and 700mm. Two sets of grips are supplied with the machine.

The equipment provides an accurate cross head speed between 50mm and 500mm / min. and is powered by a Servo Motor, which can be run at variable speed. A graphic user interface PC has been incorporated to provide accurate speed control. The machine offers an overall Head Travel Length of 800mm without Grips. It has been fitted with Universal 'S' Type / Pancake Type Load cell which has an accuracy of +0.5%.

The Presto Computerized Tensile testing machine comes complete with a calibration certificate traceable to NPL approved labs. Automatic Load Sensor Sensing is conducted by the machine through Advance electronics.

The equipment has been fitted with an Over Load / Travel Safety device which has an Auto stop facility controlled through special software In-built Advanced Micro - controller systems have also been incorporated to ensure accuracy and reliability of results.

The machine also has a tensile card - 1927 or 945a, 16 bit ADC & DAC. It is mandatory for the user to install a Computer and Printer (Pentium or Higher version is not part of the offer).

Windows based tensile software program has been specially designed to perform & store basic Tensile & compression test readings. Power Requirement is Stabilized, 220-240V AC, 50Hz, and Single Phase.

  • Has a Capacity of 250 Kgf ; Least Count :100 gm
  • Floor standing model of C.R.E. Type.
  • Grip to Grip Separation: 25mm - 700mm. 
  • Provides Cross Head Speed of 50mm - 500mm / min.
  • Accurate Speed Control through Graphic user interface PC.
  •  Cross Head Travel Length: 800mm without Grips.
  • Load Sensor: Universal 'S' Type / Pancake Type.
  • Load Sensor Accuracy: +0.5% of the Load Cell capacity.
  • Automatic Load Sensor sensing through advance electronics
  • Over Load / Travel Safety facility : Auto stop through software
  • Built in Advance Micro - controller systems incorporated.
  • Tensile card - 1927 or 945a, 16 bit ADC & DAC
  • Power Requirement: 220-240V AC, 50Hz, Single Phase.
 Capacities Available:                 
    • Capacities :  Least Count (Kg.)
    • 500             :  200gm
    • 1000          :   500gm
    • 2500          :      1kg
    • 5000          :     2kg
    • 10000        :   5kg
Rss Feed  RSS Feed
Please fill your Email ID