• Scuff Resistance Tester - HMI Model

Scuff Resistance Tester - HMI Model

 

Quick Overview : Presto Scuff Resistance Tester - HMI rubs two printed surfaces against each other (face-to-face) in the same plane, under a constant rubbing pressure. The equipment is used to evaluate color transfer from printed or coated surfaces during rubbing.


Share This Product




Product Description

Presto Scuff Resistance Tester - HMI rubs two printed surfaces against each other (face-to-face) in the same plane, under a constant rubbing pressure. The equipment is used to evaluate color transfer from printed or coated surfaces during rubbing.

The sample is attached to the base of the tester with the printed side up. A 2 psi test weight is attached to the sample and placed in position over the sample so that the printed sides are face to face. (Ensure use of customer specified material in place of the sample where required by customer). The tester is pre-set for the number of strokes (typically 100 cycles) from the HMI touch screen, and the machine is started as per the customer specification. After the required number of strokes, the samples are examined for any signs of ink transfer or scuffing.



Technical Specification




No Image
No Image

No Image
No Image

No Image
No Image

    • Model Type: Bench Model
    • Test Weight : (1+1) 2psi
    • Rubbing : Anti-Directional @60rpm by both upper jaw and lower jaw
    • Display : HMI , Colored Touch Screen Display
    • Counter Range: 0-9999 , 4 Digit,  Inbuilt in HMI
    • Diameter of Upper Clamp: 48mm ± 2mm
    • Diameter of Lower Clamp: 120mm ± 2mm
    • Upper Motor Capacity: 10kg/cm2 Torque Motor / 220VAC Single Phase Synchronous
    • Lower Motor Capacity: ¼ HP / 220VAC Single Phase, 120RPM
    • Safety Lock : Provided with Upper Clamp
    • Mode of Operation: Manual/Motorized
    • Input Voltage: 5Amp. 220 V AC, Single Phase, 50 Hz + Earth
    • Sample Preparation Templates: 2 Nos.
    • Blower Range of Counts: 9999
    • Standard: ASTM F 2497-05
    • Material: Mild Steel

Salient Features


    • HMI based Touchscreen model
    • Motorized weight arrangement in plunger for noise free working
    • Highly accurate test results under uniform load and specified diameter
    • Uniform load by weights on test sample for evenness in testing
    • Provision of set number of counts through HMI
    • Firm hold of test sample by circular clamps
    • Motorized geared system for scuff movement
    • Presettable counter up to 9999 counts inbuilt in HMI
    • Incorporated with a blower to remove unnecessary particulates during testing.
    • Highly accurate and precise results under uniform load and rubbing clamp movement.
    • Pass/ Fail criteria can be programmed
    • Program profile for selecting the test parameters and performing the test.
    • Easy data management. User can create product identification, set count, user name, set weight, etc.
    • Blower with set counts and Auto/Manual operation.
    • USB option is available for storing test data.
    • Data output in data record format.
    • History data involves username, time, date, counts, etc.
    • Accurate rpm of rotating discs using synchronous motor
    • User-friendly electronic controls and ergonomically designed features.

 

Add Review 

Your Rating



Get A Quote

e.g. Fullname




Please fill Captcha Code