• Snap Button Pullout Tester

Snap Button Pullout Tester

Model No. - PSPL -2000

 

Quick Overview : Snap Button Pull out Tester is a consistent tool to measure the holding or breaking strength between the snap/button and the garment sample. Snap Button Pull out Tester reveals the holding or breaking strength of snap...


Share This Product




Product Description

Snap Button Pull out Tester is a consistent tool to measure the holding or breaking strength between the snap/button and the garment sample. Snap Button Pull out Tester reveals the holding or breaking strength of snap attachments in terms of Kg. The Snap Button Pull out tester measures the force required to pull a snap attachment perpendicular to the garment.

The assessment of snap attachment strength is an important criterion especially in the design and manufacturer of garments of infants’ and children wear. The measurement of an uniform force applied to the snap attachment shall be recorded by means of a force-measuring device (in this case a Calibrated Presto Push/Pull Scale is utilized) known as Snap Button Pullout Tester. Once the appropriate force is registered on the Presto’s Button pull test machine, a stop clock is used for recording a set period of time.

To define the garments manufacturer responsibilities and duties to ensure that snaps are applied appropriately to all garments. Presto’s Button Pullout Tester is used to perform button pullout test to prevent separation between the snap and the garment, which represents a dangerous situation if the loose snap is swallowed .



Technical Specification




No Image
No Image

No Image
No Image

No Image
No Image

    • Measuring Capacity: 20 Kg
    • Display: Analogue
    • Accuracy: ± 0.2% within entire range.
    • Least Count: 0.2 Kg
    • Dial Divisions: 150 Divisions
    • Stroke: 60-70 mm

Salient Features


    • Dial Gauge to display results in Kg.
    • IMADA Japan imported precise Push Pull Gauge
    • Separate fixtures for Snaps, Jean Buttons, Four Hole Buttons, infant garments, amongst others
    • Highly accurate test results under push-pull force
    • Strong gripping clamps.
    • Self-calibration facility 5 Kg
    • Sample Adjusting Base Plate
    • Standards: ATSM D 4846-88, ASTM D 1776.

 

Add Review 

Your Rating



Get A Quote

e.g. Fullname




Please fill Captcha Code