Digital Tensile Strength Tester or Fabric Strength Tester works in forward and reverse direction as desired. It is based on the Constant Rate of Traverse (CRT) principle. The sample is held between two jaws; the upper jaw is stationary, while the other is made to move at a known fixed speed, with the help of branded motor and electrical with CE standard wiring; Gear Box and Special case hardened Lead Screw arrangement (100mm or 300mm per minute) ensures frictionless durability. The load exerted on the Stationary jaw is sensed by a sensor connected with load cell. which directly indicates the load in Digital form in kgs.