• ozone chamber
  • ozone chamber
  • ozone chamber
  • ozone chamber

Ozone Chamber

Model No. - OZC- 2000

 

Quick Overview : It is important to estimate the resistance of vulcanized rubber to cracking when exposed to an atmosphere containing ozone..


Share This Product


1 Review[s]| Add Your Review


Product Description

It is important to estimate the resistance of vulcanized rubber to cracking when exposed to an atmosphere containing ozone. The Presto Ozone Chamber is used to provide precise and accurate ozone (O3) concentration environment for rubber and polymer testing. During the test rubber specimens are kept under a surface tensile strain, and the ozone content or partial pressure in the test chamber is maintained at a fixed level. This instrument provided the simulation of accelerated aging and designed to assess the ability of molded/extruded rubber products to withstand cracking resistance.

The test procedure can be widely applied to:

• Accelerated ageing research

• Quality control and assurance tests and

• R& D laboratory formula experiments for cracking resistance.

The ozone concentration in the Presto Ozone Test chamber can be adjusted over a wide range (normal 20-250 pphm; or according to customer’s request) thus, satisfying different user requirements. The exact ozone concentration is controlled and measured accurately by means of a precise detecting system.

A state-of-the-art systems controller maintains rapid resumption of O3 concentration during continuous circulation. The equipment is fully automatic and is equipped with user friendly settings.

The Presto Ozone Test chamber enables sample comparison which can be carried out on specimens prepared from the test slabs or molded/ extruded rubber products. The equipment strictly adheres to ASTMD 1149; D1171; D3395; ISO Standard 1431l/ll/Hl and IS 3400 Part 20. ISO 1431 & JIS K6259 standards. It comes complete with instruction manual. Electric wiring diagram and calibration certificate traceable to NABL approved labs.



Technical Specification




No Image
No Image

No Image
No Image

No Image
No Image

    • Chamber Temperature Range: Ambient to 45ºC
    • Chamber Temperature Least Count: 0.1ºC
    • Chamber Temperature Repeatability: ± 2ºC
    • Concentration: 50 to 250 pphm
    • Compressor: 12-14 (Oil Free Air Compressor inbuilt)
    • Inlet feed gas pressure: 10 psi (max.)
    • Power: 220V, Single phase, 50 Hz, 15 A
    • Dynamic Test:
    • Motor stroke: per 30min
    • Full Stroke: 25mm to 100mm
    • Static Test: Rotation: 1rpm
    • Temperature Control: Pt-100 Sensor
    • Timer: Up to 999 hrs
    • Fan: 1/35 HP, 1360 rpm
    • Ozone generator: Yes
    • Material : Mild Steel
    • Standards:ASTM D 1149; D1171; D3395; ISO Standard 1431l/ll/Hl and IS 3400 Part 20. ISO 1431 & JIS K6259 standards.

Salient Features


    • Inbuilt ozone settings through ozone generator
    • Digital Preset Timer functions incorporated for accuracy and repeatability
    • Corrosion Resistant PT-100 sensor
    • Ozone Concentration-controlled and measured by means of precise detecting system
    • Solid state digital Programmable Temperature Controller
    • Robust Construction with GRP/IP65 enclosure
    • Ease of use of sample placements inside the test chamber with static and dynamic test fixtures
    • Dynamic Counter to count the no. of dynamic test cycles
    • Maintain rapid resumption of O3 concentration during continuous circulation
    • Fully automatic test cycle after settings through digital control

Standards



Related Material


 

  Reviews

Testing the effect of Ozone gas on my rubber gaskets has become very easy with the help of Presto's Ozone Chamber. Now I can easily the test the endurance of the products with great accuracy and ensure best quality of gaskets delivered to my clients.

Madhusudan Aggarwal

Add Review 

Your Rating



Get A Quote

e.g. Fullname




Please fill Captcha Code