Salt Spray Tester is used for testing the corrosion resistance of coating systems. It determines the exact period of time till the coating can sustain the corrosive environment and deliver protection to the inside material. The chamber is an innovative and standardized design by Presto Group. Now you can also have Salt Spray Chamber in Bangalore, Karnataka. Just connect with our team.
Model Korrox IV Magnus Series
The corrosive environment reacts with the coating and try to damage it. Once the coating is out, the corrosion can directly react with the surface and then starts the oxidation reaction. This will not only hamper the Material itself but also the overall function and performance. Thus, it is very important now to have a reality check on the coating on which the company wish to invest. It is tested before that how much of salt laden conditions can a coating sustain and for how long. This estimation can help the user to choose wisely. The salt spray tester is equipped with a pneumatically controlled canopy which is designed precisely as per test standards. The angle of canopy is built in such a way that the evaporated droplet on the canopy will never fall direct on the sample but will slide down the canopy and fall inside the chamber. Fiber reinforced triple walled body which ensure zero heat loss increasing the testing efficiency. Get Salt Spray Chamber in Bangalore and across major cities of India.
- Display: HMI Based touchscreen 7" TFT LCD Color screen
- Chamber Temp Range: Ambient to 40ºC
- Test Chamber Temp. working Range: 35ºC ± 2ºC
- Chamber Temperature Least Count: 0.1ºC
- Chamber Temperature Repeatability: ± 2ºC
- Air Saturator Temperature Range: 40ºC- 49ºC
- Air Saturator Temperature Least Count: 0.1ºC
- Air Saturator Temperature Repeatability: ± 2ºC
- Power: 220V, Single phase, 50 Hz, 15A
- pH value of Salt Solution: 6.5 to 7.2 pH
- Temperature Control: Inbuilt PID Temperature Controller
- Timer(Hour meter): 6 digits
- Test Air Pressure: 0.7Kg/cm² - 1.2Kg/cm²
- Air Regulator: 0 to 30 psi
- Compressed Air requirement: Approx. 7 cfm (Air Compressor not part of supply) Main airline pressure regulator with filter in customer scope.
- HMI-based Touchscreen Model
- Inbuilt temperature settings
- Salt Spray Test mode enabled to set parameters according to test sample
- Corrosion Resistant PT-100 sensor
- Solid state digital Programmable Temperature Controller
- Program profile for selecting test parameters and performing the test.
- Easy Data Management. Users can create PID settings, Air Saturator settings, test temperature, test and air purge time, etc.
- Current test running status display
- Robust Construction with Fiber reinforced body(Triple wall)
- Ease of use of sample placements inside the test chamber
- Pneumatically operated canopy (only for 250 Ltr. Model)
- Air purge after the test for fog settlement.
- Reservoir Tank inside sponge filter with low solution level alarm.
- 5-point Auto Tuning feature selection
- Real-time vs temperature graph
- Data recording with a temperature data reading
- USB option available (Pen drive is not a part of supply)
- User can control PID settings through Advanced Hysteresis setting
- Angle of Canopy maintained in order to restrict the flow of droplets directly on the test sample.
- Low compressed air alarm (Smart device introduce)
- Low NACL solution alarm.
- Over / under voltage protection
- Individual specimen real-time monitoring with identification.
- Maintain fault history (Easy to Diagnostic the exact issue)
How it Works
