Melt Flow Index Tester in Saudi Arabia

The Melt Flow Index Tester for Saudi Arabia offered by Presto is a major testing instrument that is majorly used in plastic and polymer industries for determination of melt flow index of plastic and polymer resins. The melt flow index of any plastic material gives valuable information about its properties and quality such as molecular structure, strength, viscosity and so forth. The testing apparatus is designed for simple operation and accurate testing procedures. The device is in strict compliance with all the international standards for accurate testing.

Presto is a known manufacturer and exporter of Melt Flow Index Tester for Saudi Arabia. The instrument offered by Presto is highly capable of providing an accurate analysis of melt flow index of different plastic resins for quality assurance purposes. The device is provided with highly efficient PID temperature controller and a highly sensitive RTD PT-100 sensor which allow easy monitoring and control of the temperature of the instrument. Along with that, there is a digital timer equipped with the machine which helps for accurate setting of test cycle timings. A digital weighing balance with a maximum capacity of 200 grams is also supplied with the device on request.

The device comes with a complete user manual and a conformance certificate.

• The apparatus comes with an LED digital
• The temperature that is offered by the instrument is from ambient to 400⁰
• A high accuracy of ±1% is shown by the machine.
• A high resolution of 0.1⁰ C is exhibited by the machine.
• The least count of the apparatus is 0.01 gms.
• The exact diameter of the piston head is 9.47 cm.
• The tube cavity of the heater assembled with the machine has a diameter of 9.55 mm.
• The orifice of the die provided with the device has a diameter of 2.095 mm.
• The sets of additional dead weights supplied with the machine include the following denominations: 1.2 kg; 2.16 kg; 3.8 kg & 5 kg and are provided on request.
• A highly accurate RTD PT-100 Sensor is assembled with the machine for accurate temperature sensing.
• The device is provided with both automatic and manual sample cutting.
• The PID temperature controller is supplied with the instrument for careful monitoring of the temperature.
• The instrument runs on an electric power supply of 220-240 volts single phase AC.
• The instrument has a power consumption of 0.5 KW.
• There is a digital lab weighing balance available with the machine as an optional accessory on request.

• The PID temperature controller offered with the device has a microcontroller based operation.
• The digital timer assembled with the machine is ideal for accurate cutting of the test sample.
• The device is provided with standard accessories.
• The instrument is designed keeping in mind following standard test methods:
   
  • IS 10810-1984: Methods for test for cables part 23: melt flow Index
  • ASTM D 1238-13: Standard Test method for flow rates of Thermoplastic by extrusion plastometer
  • IS 2530-1963 (R 2003): Standard Test Method of test for polyethylene molding Materials & polyethylene Compounds