Melt Flow Index Tester in Tanzania

Presto’s Melt Flow Index Tester for Tanzania is a very effective and efficient testing instrument that is widely used in plastic manufacturing industries. The instrument is best for the quality analysis of the plastic resins. The instrument is designed for calculation of melt flow index of the plastic resins with great accuracy. The melt flow index helps in assessment of various properties of plastics such as strength, molecular structure, and viscosity. The instrument strictly complies with all the essential quality standards and is acceptable to international industries too.

Presto is a leading manufacturer and exporter of highly advanced and efficient Melt Flow Index Tester for Tanzania that are used for accurate calculation of melt flow index of various plastic resins. The instrument is equipped with highly advanced PID temperature controller and digital preset timer for accurate conduction of the test procedure. The instrument is provided complete with standard accessories and dead weights. The instrument has two modes of sample cutting that are manual mode and automatic mode. There is also a digital laboratory weighing balance with a capacity of 20 grams provided with the instrument for accurate measuring of the test specimen cut during the procedure.

The machine is supplied complete with a user manual and a conformance certificate which can be easily traced to any of the NABL approved laboratories.

• The instrument is provided with an LED digital display.
• The temperature range is from ambient to 400⁰
• The device has a high accuracy of ± 1%.
• There is a high resolution of 0.1⁰ C is offered by the machine.
• The least count offered by the machine is 0.01
• The piston head of the instrument has a diameter of 9.47 mm.
• The heater tube cavity of the instrument has a diameter of 9.55 mm.
• The die has an orifice diameter of 2.095 mm.
• There are additional dead weights of denomination 1.2 kg; 2.16 kg; 3.8 kg & 5 kg are available on request.
• The instrument is equipped with an RTD PT-100 sensor.
• A highly advanced PID temperature controller is used in the machine.
• The device has automatic sample cutting feature.
• The power supply required by the machine is 220-240 volts Single phase Ac.
• The machine has a low power consumption of 0.5 KW.
• A lab weighing balance with a capacity of 200 grams is provided with the instrument as an optional accessory.

• PID temperature controller having a microcontroller based working is used in the machine.
• Digital timer provided with the machine for high accuracy.
• Automatic sample cutting for accurate and smooth
• Comes with standards accessories.
• Related Standards:
   
  • IS 2530-1963 (R 2003): Methods of test for polyethylene molding Materials & polyethylene Compounds
  • IS 10810-1984: Methods for test for cables part 23: melt flow Index
  • ASTM D 1238-13: Standard Test method for flow rates of Thermoplastic by extrusion plastometer