Factors To Be Taken Care Of While Performing A Tensile Test

Factors To Be Taken Care Of While Performing A Tensile Test

If you are looking for the best tensile testing equipment for testing the tensile strength of materials then we suggest you go with Presto tensile strength tester. This is one of the highly used testing equipment that is based on the constant rate of traverse principle. This tensile testing machine from Presto has been equipped with several amazing features that will make it easy for you to test the specimen. Whenever you are taking the tensile test with the help of a tensile testing machine, then there are certain factors that need to be taken care of. This test is most commonly performed by those working in the automotive industry, injection molding industry, cable and wire manufacturing industries to perform material testing procedures. Here in this blog, we are going to provide you with information about some factors that need to be taken care of while performing the test with the help of the Presto tensile strength tester. So, read this blog till the end.

How Presto tensile strength tester is helpful in performing the tensile test?


Presto is considered to be the top manufacturer and supplier of quality testing instruments. Thus, all the testing instruments you will receive from Presto are certified and NABL approved. One of the widely used testing instruments known as tensile strength tester by Presto is highly recommendable to evaluate the tensile strength of materials. This testing instrument is capable of producing enough force of tensile nature that can give precise and accurate analysis. This instrument is best for quality analysis of materials and products in QC labs as well as mainstream production chains. The instrument comes with no slippage grips for firm clamping of the test specimen and has been equipped with an upper and lower jaw. We have also equipped the technical specifications of this testing instrument below:

Technical specifications of Presto tensile strength tester

The tensile testing machine comes with an advanced load sensor to ease your testing. It comes with a single-column rugged structure and safety limit switches for over travel safety. Here are the technical specifications you will get with Presto tensile strength tester Computerized cum Digital Model ATTM 50 (C):

  •  Maximum Load range: 500 kgf
  •  Test Speed Range: 100 mm/min. or 200 mm/min.
  •  Load Monitoring: Peak Load indicator with digital readout and peak hold feature
  •  Load Sensor: S-type Load Cell
  •  Clamping mechanism: Vice type clamping Grips
  •  Load accuracy: ±3% full scale (with master load)
  •  Elongation: ±3% full scale
  •  Least count: 500 kgf/ 200 gm
  •  Load Cell Overload safety: <80% of the total load.
  •  Drive mechanism: Basic belt & pulley mechanism with two changeable speeds
  •  Safety Feature: Up and down fixed and movable limit switch rings
  •  Over Load relay contact rating: Potential free relay 5 Amp. 220 V AC single phase
  •  Earthing Required: Proper Earthing required corresponding to not more than 4 V AC with respect to Neutral.


These are the technical features of the Presto tensile strength tester. Now, let us focus on its features.

Features of Presto tensile strength tester Computerized cum Digital Model ATTM 50 (C)

Presto provides you with a high-quality tensile strength tester machine that has been equipped with several advanced features for the quality evolution of different products. We have created a list of key features that you will get with the use of Presto tensile strength tester.

  •  High testing range.
  •  Vice-type clamping grips for firm gripping of test specimen (standard grip).
  •  Advanced peak load indicator for accurate readout and storage of test results.
  •  Limit switches protection for the protection of grips and the machine.
  •  Powder-coated body with corrosion resistance.
  •  Available in different capacities as per client’s requirements.

Factors that needed to be taken care of while performing a tensile test

There are certain factors that needed to be taken care of while performing the tensile test. Therefore, you need to take care of these factors mentioned below that will help you to perform the tensile test.

  • Whenever you make use of a tensile strength tester then you should make sure that the grips used in the testing machine must be properly serrated so that there will be no chance of slippage of the specimen.
  • If you think that the specimen will break due to any other reason then, you must not continue with the test.
  • The most important factor that needed to be taken care of is the placement of the specimen. If you do not put the testing sample accurately then it might lead to an inaccurate testing result.
  • You must evaluate the thickness of the specimen according to the technical specifications of the testing machine.


For more guidance in performing the tensile test, you must call us at +919210903903 or email us at info@prestogroup.com. Our experts will instantly connect with you and assist your queries regarding this testing instrument.

you may also like

Quick quote