How to Prepare a Sample for Co-Efficient Of Friction Tester?

How to Prepare a Sample for Co-Efficient Of Friction Tester?

If you are looking for one of the effective testing instruments that will help you to determine the stackability of plastic films, then we suggest you go with Presto co-efficient of friction tester. This is one of the amazing testing equipment that will help you indicate the sliding friction of plastic films and sheets when sliding over itself or other substances. In the plastic industry, the desire of every manufacturer is to avoid any friction between their packaging products so as to avoid any damage.

For instance, if two packets are slippery in nature then they will slip down from the storage space and may even fall or burst. Thus, you need to keep a check on the sliding friction of your packaging materials in order to keep them away from getting damaged. Here in this blog, we are going to provide you with information about how you can prepare specimens accurately in your testing machine. But first, we will discuss the main purpose of using co-efficient of friction tester- Digital model.

What is the main purpose of using co-efficient of friction tester- Digital model?

In the flexible packaging industry, the manufacturers focused more on evaluating the quality of products and checking the friction in them. The products having more slipperiness in the package tend to get damaged during storage and transportation. Thus, it is very necessary for you to check the stacking friction of flexible packages so as to invest in quality.  

The coefficient of friction, or COF, is determined by the ease with which two surfaces slide against each other. The dimensionless value of the coefficient of friction is the ratio of the force required to slide the surfaces to the force perpendicular to the surfaces. When the product has lower friction, then it will indicate that the surfaces are slicker that means there is less resistance to the sliding motion.

Therefore with the help of the coefficient of friction tester digital model, you can easily evaluate the friction in plastic films. This testing will be performed by sliding the plane beneath a block or weight. The film specimen will get attached to the base of the block and then the block will get connected to the load cell which measures the frictional force between the plane and the block.

Now, let us focus on the features and technical specifications of this lab testing instrument.

Features of Presto co-efficient of friction tester (digital model)

This lab testing instrument from Presto has been embedded with several advanced features that will allow you to easily take co-efficient of friction tests. The value obtained for the friction coefficient will depend on both the load (pressure or perpendicular force applied) and the velocity.

Here we have listed the features of this lab testing instrument.

  • Clamps are provided to attach samples to the glass slab.
  • Safety switches are provided at the end surface to stop the motion of the load cell along with the weight.
  • Gives both dynamic and static friction.
  • Speed regulating knob.
  • Digital display for both kinetic and dynamic friction.
  • Calibrated in accordance with ISO norms, Calibration Certificate provided traceable to (NABL).

Technical Specifications:

  • Outer Body Construction: Mild Steel, Powder Coated
  • Sample Mounting Construction: Stainless steel with glass mounting
  • Load Cell Capacity: 5Kgf
  • Motor Single phase: ¼ H.P
  • Display for load: Dual Display: Digital and Computerized
  • Block: Weight , Dimension, Thickness: 200gm, 63.5 x 63.5 mm, As per Load
  • Speed: 150±30mm/min
  • Standards: ASTM D1894, ASTM D202, ASTM D4918, ISO 8295 and TAPPI T815
  • Power Supply: 220 V AC, 50 Hz, Single Phase Power Supply
  • Safety: Limit Switch
  • Weight of slide Clamp: 200gm

With these advanced features, you will be able to get rid of dodge issues in framing, transporting, and assembling the bundles. Now, let us focus on how you can prepare the testing sample on this lab testing instrument.

How to prepare the testing sample on Presto co-efficient of friction tester (digital model)?

The coefficient of friction tester is the static instrument that will help you to test the stackability of plastic films over one another. If you want to prepare your testing specimen on this lab testing instrument, then we suggest you follow the below-mentioned steps.

  • Cut the sheet according to the size of the glass approximately of size 53 x 15 x 1mm.
  • The sample is placed over the glass sheet.
  • This provides smooth support for the specimen.

In this way, you can easily prepare the testing sample on Presto co-efficient of friction tester. By testing the friction of plastic films, you can easily improve their product quality. So, what are you waiting for? Book a Free sample testing session with the help of this lab testing instrument.

you may also like

Recent News

blog img

Catalogue 2022

Get information about new product launches, research, innovation and endeavors at Presto.

download Free Copy
topline
formbanner

For More details & Information

Please fill this form

Or

  Call on  +91 129 4272727