Cyclic Corrosion Salt Spray Chamber 2.0

Presto Cyclic Corrosion Salt Spray Chamber 2.0 – Worlds most Interactive and versatile corrosion test systems range available, synthesizing salt spray with other environmental conditions such as controlled humidity, ambient drying, air drying, dwell cycle and wetting /condensation.

Presto Cyclic Corrosion Salt Spray Chamber models will perform the neutral salt spraytests, along with in addition these CCT models are loaded with extra features which enables users to perform intense ‘modified’ tests such as those explained in ASTM G85. In this the conventional salt spray is often programmed with multiple climate, in a multi-stage cycle, to intensify the test. Some Test Cycles Names- Salt spray and Wetting / Condensation Humidity (SWAAT) or Salt spray and Air drying (PROHESION).

• Display: 7-inch TFT LCD HMI Touchscreen
• Humidity Range: 30–95% RH (±5% RH)
• Dry Cycle Temperature: 25°C to 60°C (±3°C)
• Salt Spray Temperature: 35°C (±2°C)
• Temperature Resolution: 0.1°C
• Air Saturator Temperature: 40°C–55°C
• Power Supply: 220V AC, Single Phase, 50 Hz, 15 A
• Salt Solution pH: 6.5–7.2 (Neutral) / 3.0–3.3 (Acidic)
• NaCl Tank Capacity: 60 L
• Test Air Pressure: 0.7–1.2 kg/cm²
• Air Regulator: 0–30 psi
• Available Chamber Sizes: 450 L and 1000 L
• Construction Material: Fiberglass
• Air Purge: Auto/Manual
• Over Temperature Alarm: Yes
• Air Saturator Auto Refilling: Yes

• 7-inch HMI touchscreen for intuitive operation.
• Cyclic test mode with programmable multi-stage test profiles.
• Relative humidity monitoring on the HMI.
• Fiber-reinforced triple-wall chamber construction.
• Pneumatically operated canopy.
• PT-100 corrosion-resistant temperature sensor.
• Programmable PID temperature controller.
• USB data recording and temperature logging.
• Real-time temperature graph and test status display.
• Air purge function for fog settlement after testing.
• Low compressed air and low NaCl solution alarms.
• Over/under voltage protection.
• Individual specimen monitoring with fault history.
• Ethernet connectivity with remote monitoring through VNC.
• Web monitoring and email alarm notifications.
• Hindi and English HMI language support.