TP310 is a prominent color measurement instruments used in many mainstream industries which have been designed and manufactured by competent engineers and scientists of Testronix. The instrument has many advantages of other international standard color measurement instruments.
Presto Melt Flow Index Tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a jet of a particular length and diameter.
The Presto Melt Flow Index Tester - NXG Model is a reliable instrument used for evaluating and analyzing the flow properties of molten plastics or resins. The determination of the melt flow index of plastic materials is an important parameter in the evaluation of its quality.
The Presto Tensile testing Machine is highly recommended for evaluating the tensile strength of products and materials. The equipment is based on the Constant Rate of Traverse (CRT) principle. It is equipped with an upper jaw and a lower jaw.
Registered Design Patent No. 252611
The Presto Color Matching Cabinet Spectrum Asia II is highly recommended for laboratories and industries where it is important to maintain color consistency and quality. The equipment provides a standardized environment for evaluation and visual assessment of color.
Magnamike is a high-quality product by Olympus. It is the best device to perform wall thickness gauge testing. The instrument provided a non-destructive method of testing the wall thickness of the PET bottles. Presto Stantest is an authorized dealer of the device.
Hot Air Oven is a unique test cabinet designed to detect the change in the physical characteristics of the material and to ascertain the actual working life of testing device at elevated temperature. Works on Forced air circulation, thermal convection principle, suitable for Tests like heat deformation, compression set, heat resistance required in rubber and plastic industries.
Secure Seal Tester - Next Generation Model is a consistent tool useful to measure the seal integrity of glass/plastic containers. This instrument has been designed to address the special needs of sealed carbonated beverage containers that use aluminum roll-on, twist crowns or plastic caps.
Presto Color matching cabinet- Spectrum I Prima series has been designed to match the consistency of colors present in the product. This quality lab testing instrument has been designed accurately with correct light types and thus allows direct comparison of products that must have special color characteristics. Users will get five possible lighting types embedded in this testing instrument. These colors are supplied as standard: "D65", "TL84, "UV", "CWF" and "TFL”.
The new-design MFR Model can quickly extrude the flow rate of molten resins utilizing the advanced setup of load, piston, and a metallic barrel. The specimen, majorly in granule form is put inside the barrel and the piston is inserted. Loads, as per requirement are placed on the piston and the parameters are then selected from the touchscreen display.
The melt flow rate of the polymers is one of the essential properties of the materials that will help the manufacturers in determining the rate at which it flows. This property of the material is important as it provides the necessary data on the mass flow rate of the polymer. Thus, to test the melt flow properties of the materials, we at Presto have recently designed a high-quality Melt Flow Index Junior model.
The IZOD/Charpy Impact Tester is a reliable and consistent testing instrument that is used for measuring the impact resistance of materials under sudden falling force or impact. Presto has designed a high-quality IZOD/Charpy Impact Tester NXG model that will easily reveal the impact strength of plastics and other related materials.