Multilayer Films Testing Instruments

The coefficient of Friction Tester - Digital Cum Computerised is a consistent tool to indicate the starting and sliding friction of plastic films and sheets when sliding over itself or other substance at specified test condition.

Coefficient of Friction Tester is a consistent tool to indicate the starting and sliding friction of plastic films and sheets when sliding over itself or other substance at specified test condition.
Registered Design Patent No. 341519-003

The Presto Color Matching Cabinet Spectrum Asia II is one of the widely used lab testing instrument in the industries and laboratories where it is important to maintain the color consistency of the products. This color matching machine will provide accurate assessment of colors under standardized environment for evaluation and visual assessment of colors.

The Presto Dart Impact Tester is used for determining the impact of a free falling dart on a plastic film. The energy of the falling dart causes the film to fail under specified conditions. The dart has a hemispherical head and is held by a strong electromagnetic dart holder.

Presto's Dart impact tester - HMI is a high-quality testing instrument, used in different packaging industries, to measure the strength of the plastic films to withstand the various forces levied on it. The instrument is provided with an electromagnetic...

GELBO FLEX tester is valuable test in determining the resistance of flexible-packaging materials to flex-formed pinhole failures or measuring the flex durability of flexible barrier materials. The flexing action consists of a twisting motion followed, in most cases, by a horizontal motion, thus, repeatedly twisting and crushing the film. The frequency is at a rate of 45 cpm. Confirms to ASTM F392.

The gloss meter is available in different geometries to measure the specular reflection gloss of a surface or a material. The Gloss Meter Tri-angle is used to determine the gloss on a surface and measures the amount of reflected light.

The Presto grammage checking kit comprises of the GSM round cutter along with Digital weighing balance. GSM round cutter with imported industrial blades gives you a very accurate & seamless cutting of your samples.

Presto's Hot Tack Tester is an extremely effective testing machine which is used to perform hot tack test and check heat seal performance of laminated films, plastic films, and other packaging products.

Heat Sealer Prima is a consistent tool used to perform sealing on flexible packaging products and other thermoplastic materials using pressure and heat by maintaining high temperatures. A heat sealer is used to measure the heat seal performance of composite films.

Heat Sealer is a consistent tool used to perform sealing on flexible packaging products and other thermoplastic materials using pressure and heat by maintaining high temperatures. PRESTO Heat Sealer is manufactured under various Test Standards such as ASTM F 2029.

Heat Sealer is a consistent tool used to perform sealing on flexible packaging products and other thermoplastic materials using pressure and heat by maintaining high temperatures.

The MB95?s halogen heating system distributes heat uniformly over the sample and speeds up the drying process ? delivering fast and precise measurements.

Presto Adhesion Strength Tester is used to quantify the permanence of adhesion or peel ability of self- adhesive pressure sensitive materials. Peel adhesion is defined as the force required for removing a pressure sensitive coated material.
Registered Design No. 361206-003

Peel Adhesion/Bond/Seal Strength Tester is a consistent tool to quantify the permanence of adhesion or peel ability of a self-adhesive pressure sensitive materials. Used for checking the Peel, Adhesion, Bond, Seal Strength testing for Plastic Films and Foil.

Punctures Testers are widely used to evaluate the rupture or puncture characteristics of a material. This is done by performing a compression test on a material, where the compression is done with the help of a probe...

Scuff Resistance Tester is a unique test instrument to determine the color transfer from printed or coated material against rubbing. Scuff resistance testing can reveal how well a material will hold up against abrasion, rubbing, and scratching. This information is critical in industries such as packaging and printing where there is a vast use of labels and other printed materials.

Scuff testing of labels and other printed materials is used to determine their resistance to abrasion, scratching, or rubbing. This type of testing is essential for ensuring that the labels and printed materials can withstand handling and transportation without losing their legibility, durability, or aesthetic appeal.

The term scuffing is the rubbing of two materials against each other. Scuff Resistance Tester is used to evaluate the rub resistance (i.e. the damage which has taken place through rubbing) of labels and general printed matter.

A color spectrophotometer is an instrument designed for physical sample analysis via full spectrum color measurement.Color spectrophotometers offer a higher level of flexibility and versatility than colorimeters due in part to the fact that they offer multiple illuminant/observer combinations and can operate in multiple geometric arrangements.

A portable spectrophotometer is a consistent tool useful for performing several measurements on a variety of samples of colors such as white & black, dark & light and several other color boards. They are primarily used to reflect the measurements and best suited for the sophisticated color analysis such as the problem of metamerism.

The Farbung TP110 is a highly used and preferred color measurement instruments in many industries. There are several new features that are added to the product by the highly competent team of engineers and scientists of Testronix.

TP310 is a prominent color measurement instruments used in many mainstream industries which have been designed and manufactured by competent engineers and scientists of Testronix. The instrument has many advantages of other international standard color measurement instruments.

Presto Vacuum leak detection system is now available in Prima series. With HMI Touch Screen Display and fully automatic controls, one can ensure accuracy with repeatability and take data acquisition for the various tests. The Vacuum Tank is specially designed to conduct leak integrity testing of large sized packages in any of the testing mediums.

Presto Vacuum leak detection system is now available in Prima series. With HMI Touch Screen Display and fully automatic controls one can ensure accuracy with repeatability and take data acquisition for the various tests. It is capable of testing both Bottles/containers and other packages. The testing medium can be air. It is the best instrument for accurate and quick testing of small to medium sized containers or packages.
Registered Design Patent No. 361206-002

The Digital Eco Vacuum Leak Tester is a cost-effective and efficient testing solution designed to enhance the quality control processes in your packaging applications. Crafted with exceptional precision, this laboratory testing equipment is tailor-made for the accurate detection of leaks in a diverse range of packaging materials. Proficient in examining a wide array of items such as foiled cups, gels, grains, cereal, bakery products, confectionery items, frozen foods, cheese, medical supplies, and pharmaceutical products, the Digital Eco Vacuum Leak Tester is your go-to solution. Whether you need a vacuum leakage tester for testing your food packets against vacuum leakage or you want to preserve the integrity of your packaging then you must go for our vacuum testing machine.