Avoid the problem of poor bond strength of materials with a peel tester

Avoid the problem of poor bond strength of materials with a peel tester
  • Gaurav Malhotra

When you are using adhesives, it is important to make sure that they have good bond strength otherwise, you may end up with product rejection rates. Poor bond strength can lead to disastrous results, such as your products falling apart or not being able to withstand stress or wear and tear. Thus, the bond strength of the adhesives or other related materials should be tested accurately in order to ensure quality products are delivered to the customers. Presto has designed high-quality lab testing instruments known as peel/seal/bond and adhesion strength testers.  This high-quality lab testing equipment is used to test the peel ability of adhesives & ensure that the adhesives will be able to withstand higher peel forces. Here we will discuss brief information about the Presto peel/seal/bond strength tester and how this lab testing equipment is used to test the peel ability of adhesives.

Importance of testing the bond strength of adhesives

There are many benefits of testing the bond strength of a peel tester. By doing so, you can ensure that your product is of high quality and will not easily break or come apart. This is especially important if you are selling products that will be used by consumers, as they need to be able to trust that the products they purchase are durable and reliable.
 
Additionally, bond strength testing can help you improve your manufacturing process. By understanding where the weaknesses are in your bonding process, you can make changes to improve it. This can result in a more efficient and cost-effective production line, as well as better-quality products overall.
 
Presto peel/seal/bond strength tester has been relatively designed to test the bondability of different materials like adhesives, tapes, etc. This quality and standardized lab testing equipment will help to check the bond strength of foam tapes and other related materials.
 
Now, let us have a look at the Presto bond adhesion tester and its high-end features.
 

All about Presto peel/seal / bond adhesion tester

Testing the peel/seal and bond properties of the materials is an important aspect of quality control for different packaging materials. Thus, we at Presto designed high-quality peel/seal/bond adhesion strength testing equipment that is used to define the force required for removing pressure-sensitive tapes and coated materials.
 
This ASTM-standardized lab testing instrument is highly recommended in the plastic packaging industry and provides highly accurate results for testing the bond strength of the materials. This high-quality lab testing equipment has a microprocessor-based display for accurate testing results.
 
Besides this, the Presto peel strength tester comes with powder coated corrosion-resistant body that facilitates users to use this testing instrument for a longer period of time.  With the use of this quality lab testing equipment, one can easily measure the peel ability of adhesives. Now, let us focus on the features and technical specifications of this quality lab testing equipment.
 

Features of Presto peel strength tester

If the bond strength of an adhesive is poor, the results can be disastrous. The adhesive may not hold up to the forces it is supposed to, potentially leading to structural damage or even failure. Thus, we at Presto have designed a high-quality peel strength tester that is used to test the peeling ability of adhesives and ensure that users will get highly accurate lab testing results every time.
 
Now, let us focus on the advanced features of this quality lab testing equipment.
 
  • Print-out facility is optional.
  • Microprocessor-based display for accurate test results
  • Display for Peel Adhesive strength of test specimen
  • Memory to hold up to 9 test reading
  • Highly accurate test results under elongation force
  • Strong gripping clamps to perform the Peel test at 180 degrees.
  • Bright LED display
  • Feather touch controls
  • VFD drive multi-speed facility also available (30-300 mm / min.)
  • Optional: Seal Strength can also be tested using a 90-degree test fixture
 

Technical specifications of Presto peel strength tester

  • Load Cell Capacity: 20 Kgf
  • Display: LED (Digital)
  • Accuracy: ± 2% at Full Load (with master load)
  • Least Count/Resolution:  0.020 kgf
  • Power: 220V, Single phase, 50 Hz
  • Speed:  300 mm/min ± 5%
  • Standards: ASTM D903
With these high-end features and technical specifications, one can easily test the bond and peel strength of adhesives, and users can easily reduce problems related to poor bond strength.
 
Conclusion
 
The results of poor bond strength will lead to damage to the products which ultimately results in high product rejection rates. That's why it's so important to make sure that adhesives are properly applied and that they have a strong bond. Testing the bond strength of adhesives is important in ensuring quality products will be delivered to the customers. Presto being the leading peel/seal/bond adhesion tester manufacturer in India will provide this quality lab testing equipment at the best and most affordable prices. If you want to know about bond strength tester price, or want a free sample testing session regarding this quality lab testing equipment, then give us a call at +91 9210903903 or email us at info@prestogroup.com. Our team of technical experts will arrange a quick sample testing session with you and provide you with all related information as per your requirement.

Recent News

blog img

Catalogue 2023

Get information about new product launches, research, innovation and endeavors at Presto.

download Free Copy

Need more information

Connect with us for your business enquiries. Generally we respond within one or two working days.

send enquiries

Contact Us

Get a Quote