Blogs / Knowledgebase

In automotive industry, measuring the thickness of the surface is a very crucial task. Due to complicated groove structure at some points, the measurement not only becomes difficult but sometimes impossible with conventional methods.

Textiles have the capability to absorb high rate of humidity and water both, which leads to extensive damage. There are multiple types of Humidity Damage in Textiles such as tide lines, dye bleeds, shrinkage, distortion, and Mold growth.

ASTM D412 is an international standard test designed for testing the tensile strength of rubbers and thermoplastic elastomers.

PET bottles are widely used in the packaging industry. Polyethylene terephthalate or PET is a very commonly used plastic and is majorly preferred because of its recyclable properties.

To determine the effect of free falling on plastic films and laminates, dart impact test is performed. In this test, a missile like dart falls freely on the test sample under controlled conditions.

Any packaging material that is made up of paper or pulp has tendency to absorb water. This reduces the strength of packing, also, affects the contents packed inside. Before using any material for packaging, it is important to check its water absorbance and retention capacity.

Plastic has become the favourite mode of packing across the world. Different industries like pharmaceutical industries and F&B are relying more on it than any other material. It can be used for storing and transporting of materials in any form be it solid, liquid, semi-solid or powder.

BOD incubators are popularly used in different industries to create an isolated chamber having temperature 20°C. Some industries need to test the products at a certain temperature where biochemical oxygen demand can be fulfilled.