With the wide use of PET bottles in the packaging industry, it is important for you to test their quality beforehand. This can be done by cutting the bottles appropriately. Thus, we at Presto lab testing instruments, have come up with one of the amazing lab testing equipment known as the Presto hot wire bottle cutter. This lab testing equipment is widely used in the PET bottle industry to test each and every section of PET bottles with ease. This will help you to perform accurate weight analysis of PET bottles so that the customers will not find any errors regarding the lab testing equipment.
Sometimes, the quality heads or the product testing instrument manufacturer will find difficulty in testing the quality of bottles and as a result, they will get inappropriate bottles. Thus, you need to take care of several factors while cutting the bottles accurately with the help of this hot wire bottle cutting equipment. Here in this article, we are going to provide you with information about the main cause of inappropriate bottle cutting with a hot wire bottle cutting testing instrument. So, let us get started!
What is the use of Presto hot wire bottle cutter?
PET Bottle has always been the preferred mode of packaging for every industry. It is widely utilized in distinct production verticals for filling up beverages like juices, carbonated drinks, etc. Thus, testing each and every aspect of PET bottles is necessary to make sure that the right products will be delivered to them accurately. Thus, we at Presto have come up with one of the amazing lab testing equipment known as a PET bottle cutter. This is an amazing lab testing instrument that will help you to make sure that the right testing products will be delivered by the customers with ease.
It is essential for manufacturers of PET bottles to conduct a standardized quality assurance test prior to delivering the product to the market. This is due to the increasing demand from customers for PET bottle packaging. The testing method must cover the evaluation of the quality and strength of bottles. There are many different ways to test the quality and strength of PET bottles. Thus, you can easily conduct this lab test using a Presto PET bottle cutter.
Now, let us discuss the features of this hot wire bottle cutting testing instrument. This lab testing instrument is very easy to use and provides advantage immense advantages. You can also read about the advantages of using the Presto hot wire bottle cutter
Below we have listed the features & technical specifications of the Presto hot wire bottle cutter.
Features of Presto hot wire bottle tester
The Hot Wire Bottles Cutter is one of the most efficient and ideal instruments that can be used for the smooth and ideal cutting of PET bottles. The instrument is provided with two cutting wires which help in cutting the bottles into three different sections. The length of each section can be adjusted by adjusting the distance between the cutting wires. Below we have listed the features of the Presto hot wire bottle cutter:
- A highly efficient instrument with the smooth cutting of the PET bottles.
- Best for preparing a specimen for section weight analysis of the PET bottles.
- Bottle holding fixtures provided with the instrument with adjustable length & height.
- Two-wire and three-wire models are available for customers depending on their requirements.
- A temperature adjusting knob is provided with the machine for adjusting the heating level of the instrument.
- Accurate and efficient monitoring display for heating.
Bottle Neck Holder
Standard- 21.74 mm (other dimensions also available on request)
Variable Voltage Potentiometer
Kanthal Element Wire
Control Panel Material
Machine Body Material
Aluminum duly powder coated
No. of Wires
Two Wires (More wires available on request)
Electrical supply requirement
220 V 50 Hz Single phase AC
Maximum Diameter of bottle
130 mm (vary as per requirement)
Maximum Cut length
Adjustable from 0 to 310 mm
Three different Heating levels (Low, Medium, High)
Causes of inappropriate bottle cutting with Presto hot wire bottle cutter
The Presto Hot wire bottle cutting testing instrument is highly used to make sure that the bottles will be cut accurately. There can be many causes of inappropriate bottle cutting. Below we have listed them.
- The testing specimen will not be accurately placed.
- Broken wires of bottle cutter.
- Minimized heating level.
These can be 3 causes of inappropriate bottle cutting. You can easily test the strength of PET bottles by testing each and every section of bottles accurately. You can give us a call at +91 9210903903
or email us at firstname.lastname@example.org
. Our team of technical experts will consult you regarding all your queries.