The Cobb Sizing Tester for Indonesia offered by Presto is one of the best testing instruments that can be used in paper and packaging industries for analyzing the water absorbing abilities of different materials such as Paper, cardboard, corrugated boards and fiber boards. The water absorbency of a packaging material helps the manufacturers in determining its suitability for working conditions that are wet or moist. With the help of this machine, it is possible to determine the extent of penetration that moisture can do to the packaging and hence it can be decided whether the product inside the packaging is safe or not. The device complies with all the international standards and can be used in international market too.
Presto is an industry trusted Manufacturer and supplier of highly efficient Cobb Sizing Tester for Indonesia that have been serving the packaging industries of many countries for a long time. The instrument is ideal for measuring the maximum amount of moisture or water a packaging can absorb. This property of materials helps in manufacturing the best product for moist or wet working conditions.
The instrument is also provided with a roller which is used to squeeze the excess of water from the test sample after it has been immersed in water for a particular amount of time. The device complies with all the necessary international quality standards and is provided to the clients with a user manual for a better understanding of working with the machine and a conformance certificate which can be traced to any of the laboratories that are approved by NABL.
Box Compression Tester is a consistent tool to indicate the Compression strength of cardboard boxes so that it does not get deformed or crushed when stacked one above the other during storage or transit. The Compression strength is determined by placing the box on a flat platform and pressing it downwards from the top with the help of motorized arrangement.
Box Compression Tester is designed to quantify box or container performance so that the effect of various board mediums, closures and interior partitions can be plainly compared by means of Load & bend analysis. Presto BOX Compression Tester is manufactured to meet the requirements of the Paper & Packaging Industries according to International Standards. It is ergonomically designed and easy to use.
Presto Box Compression Tester is used to measure the box compression strength (BCT), shape change and stacking capability of cartons, beehive crates, paper tanks, paper cases etc. Box Compression Tester is designed to evaluate compression strength of the corrugated box and the load range selected to completely collapse as peak load or may be with a pre-determined load for a given period to evaluate stacking load. Compression Strength Test also serves as a useful index of over all quality of the material and workmanship of the box.
Presto Edge Crush tester – Digital (ECT) is rugged enough for any production testing environment. It is the ideal testing equipment for paper making, packaging, quality inspection department and more. ECT tester – Digital (ECT) is a useful equipment for determining the probable compression strength of corrugated and solid fiber board boxes by testing the paper and paper-board used in making such boxes.
Edge Crush Tester / Ring Crush Tester / Flat Crush Tester is used for accurate testing of paper, paper-board, solid fiber-board & corrugated board for ECT test and its components. The Edge Crush tester can also be used for performing compression test on all small packages.
The higher ECT value determined by the ECT tester depicts the rigidity of the CFB box. Hence, it may be used to compare the quality of the CFB board. It is also possible to determine the compression strength of the box (CFB) by using ECT tester with McKee’s formula i.e.Compression strength = k. ECT x T x Z
Where, K= Constant
ECT = edge crush test value
T=Thickness of CFB board (wall thickness)
Z= Perimeter of the box i.e. (2 L + 2 W)
The Presto Tensile testing Machine is highly recommended for evaluating the tensile strength of products and materials. The equipment is based on the Constant Rate of Traverse (CRT) principle. It is equipped with an upper jaw and a lower jaw.
While the upper jaw is stationary, the lower one can be moved at a designated fixed speed with the help of a motor. The test specimen is held between the two jaws. The lower jaw is gradually made to move to evaluate the tensile strength of the sample.
The motor is equipped with a gear Box and a lead screw arrangement. The machine also incorporates a special sensor, connected with a load cell. The sensor is capable of judging the load exerted on the stationary jaw and directly indicating the reading in kgs (in digital format).
There are special case hardened lead screws which ensure stability and durability. It incorporates a standard branded motor and CE standard electrical wiring. The completely modular construction of the Presto Tensile Testing Machine ensures trouble free maintenance and easy operation.
Presto Tensile testing Machine is highly stable machine, built using heavy mild steel. Its strength and high quality can be attributed to the various built in safety arrangements, such as over load and over travel protection.
The Presto Tensile testing Machine has an Autumn Gray & Blue combination finish and bright chrome / zinc plating has been added to impart a corrosion resistant finish.
The Instrument comes complete with Instruction Manual; Electrical Wiring Diagram & Calibration Certificate traceable to NABL approved Labs.
Presto Adhesion Strength Tester is used to quantify the permanence of adhesion or peel ability of self- adhesive pressure sensitive materials. Peel adhesion is defined as the force required for removing a pressure sensitive coated material, which has been applied to a standard test plate under specified conditions, from the plate at a specified angle and speed. Presto Adhesion Strength Tester is strictly manufactured as per ASTM standards and is highly recommended for use in the plastic packaging industry.
The Presto Adhesion Strength Tester is built on a rigid metallic base plate and finished in Autumn Gray & Blue combination painting, the instrument has a bright chrome / zinc plating to give it a corrosion resistant finish. The tester comes complete with Instruction Manual; Electrical Wiring Diagram & Calibration Certificate traceable to NABL approved Labs.
Presto offers best quality TP 110 Precision Color Measurement device for Indonesia with additional new features. The instrument measures the color consistency of various types of products and is designed for many production verticals like plastics, rubbers, paper & Packaging, paint & plating, automotive, textile and many more. This device has many user-friendly and easy to operate features to offer highly reliable and accurate test results. Presto Stantest is an authorized dealer of Testronix Instruments.
Presto’s Salt Fog & Spray Testing Chamber for Indonesia measures the corrosion resistant property of materials and its effect on environmental factors on the product. This test is performed before starting the process of manufacturing to produce high-quality goods. This device measures various properties of the material against corrosion under different climatic conditions using standard test methods. Three types of models are available for Salt Spray chambers; Korrox –III, CASS cum salt spray chamber and Eco model with customized specifications.
Presto design Salt Spray Chamber for Indonesia with user-friendly features. The touch screen control panel can easily set the desired level of temperature. The double-walled fiber plastic chamber of the device is duly fitted with glass wool insulation that prevents corrosive environment and allows efficient testing of samples. This machine includes some standard accessories like a regulator, gauges, cyclic timer, air purging, time totalizer along with the racks to place the specimen.
Presto offers superior quality of Polariscope Strain Viewer for Indonesia. This instrument is extremely effective to measure the strain in the quality of the Preforms. The polarized light reflects on the sample to analyze the defects in the quality of the Preform. The device works on the principle that measures the slight difference in the material distribution with the little variation in the refractive index of the Preform. Presto Stantest provides two models of Polariscope for Indonesia; Deluxe and Computerized model.
In Photoelasticity process, the refractive index value of the material changes quickly due to uneven distribution of the material. Photoelasticity process causes major problems for the manufacturers of PET & Preform products and glass products because this could be a main fault in the products. Therefore, Presto manufactures Polariscope Strain Viewer for Indonesia to solve this problem easily. The high-quality material is used to design the testing machine that offers extended service life to the product and accurate testing procedures. The device is delivered with calibration certificate which is traceable to approved laboratories.
Presto designs the best quality Melt Flow Index Tester for Indonesia. This device is primarily used by the plastic manufacturing industries to determine the flow properties of molten plastics, resins, and granules. The Melt Flow Index (MFI) of plastics is defined as the rate of thermoplastics or granules. MFI is the flow rate of melted plastic which comes from a cylindrical vessel of specific length and diameter.
Presto’s Melt Flow Index Tester for Indonesia is designed with microprocessor based PID temperature controller and other user-friendly controls. The temperature can range between 0oC to 400oC and provides the resolution of 0.1°C with an accuracy of ± 0.1°C. Since the device has automatically cutting facility, the melted sample cuts after 10 minutes. This ensures smooth operation of the machine. Some specific conditions of load, piston position, the temperature in a cylindrical vessel inside the heated barrel are required to perform this test. This machine is based on the national and the international standard test methods. All the plastic manufacturers in Indonesia can use this machine to measure the quality of the plastics.
Presto’s Conditioning Chambers for Indonesia preserves the desired level of temperature and humidity efficiently with its user-friendly controls and sophisticated technology-based features. As insulated glass wool ergonomics is present in this instrument, there is a low ratio of heat loss. Since this is a digital machine, all test results will appear in digital format.
For the extremely reliable process of testing the samples, Presto Stantest manufactures high-quality Humidity Test Chambers for Indonesia that provides products to various environmental extremes such as humidity, vibration, altitude, temperature and many more. To ascertain the quality of the products, manufacturers in Indonesia use these chambers widely in rubber industries, electronic goods manufacturing industries, automobiles manufacturing industries, plastic manufacturing industry, and in the automobile industry. The accelerated environmental test procedure principal works for testing device. The quality and performance of the chamber are indomitable.
Presto being an authorized dealer, offers the high-quality, highly reliable and portable Magnamike 8600 – Thickness gage in Indonesia. It is a bottle thickness gage measurement instrument from Olympus that is manufactured to perform the non-destructive testing. This user-friendly testing device has very simple operations that are used to measure the thickness of non-ferrous materials like plastics, glass, PET & Preform, water tanks, aluminum and many more.
Magnamike 8600 – Thickness gauge in Indonesia is used to measure the wall thickness of bottles and works on the principle of Hall Effect Technology. The magnetic probe on the outer surface and a ball inside the bottle aids the device to measure the thickness of the bottle without deforming its shape. The distance between the ball and the probe is accurately measured by the sensor and then displayed on the colored screen.
Presto's Tensile Testing Machine for Indonesia calculates the maximum tensile strength of a product. Tensile stress at which a product breaks or deforms is determined using this machine. The testing device works on the principle of a constant rate of the traverse (CRT) and is provided with the upper jaw and lower jaw. During testing with Tensile Testing Machine, the test specimen is clamped between the two jaws and moved in the opposite direction. This is done to calculate the maximum tensile strength that a sample can bear. The user-friendly features are available with a digital panel that display results in digital format.
Presto designs and manufactures the best quality of Tensile Testing Machine for Indonesia that have a lead screw arrangement and high-quality gear box. The machine has a high-quality sensor connected with a load cell. The sensor is capable enough to measure the amount of load which is exerted on the stationary jaw. The output of sensor reading is provided in kilograms on the digital panel. The lead screw arrangement is provided to ensure test stability and durability. The CE standard electrical wiring and standard branded motor are available in the machine. Trouble-free operation and maintenance are assured due to highly modular construction.
Presto Stantest manufactures and designs the high-quality Box Compression Tester for Indonesia. The Box Compression Tester determines the performance of the boxes and uses the load and bend analysis procedure that aids in easy comparison of quality of fiber boards, cartons, and closures with the standard specimen.
In Indonesia, manufacturers of paper and packaging industries require Presto’s Box compression tester to assure the quality of the specimens as per the international standards. Anyone can operate the testing machine with ease due to its user-friendly features. There are two types of Box compression tester models designed for Indonesia; one is Digital Model, and other is Digital cum computerized model.
The specific design of Presto’s Box Compression Tester for Indonesia measures stacking ability, strength, and potential of the paper boards, cartons, paper cases, beehive crates and many more. The instrument provides maximum pressure on the specimens until the test sample collapse completely for a given period. This is done to determine the compression strength of the boxes. The primary use of this instrument is for the paper and packaging industries, testing laboratories and many more.
Presto is a major industry leading manufacturer and supplier of the High-quality Vacuum Leak Tester in Indonesia. This instrument offered by Presto is a major requirement in PET industries for testing the intactness of packaging materials and products such as PET bottles and plastic pouches. The instrument creates a high-pressure vacuum to test the integrity of the test specimen. At presto, we understand the value of quality for our clients. Hence, we provide testing instruments with best accuracy and efficiency so that our customers could ensure the best quality of products to their clients.
Presto has been providing high-quality Vacuum Leak Tester for Indonesia from a long time that have been trusted for their accuracy and efficiency. The instrument offered by Presto is manufactured in the state of the art manufacturing facility keeping all the international quality standards in focus. The instrument has a very simple and easy operation that offers precise quality testing results and helps in the better quality assurance of the products. The instrument comes with a digital timer with the help of which the test cycle time can be programmed accurately. The pressure gauge and control valve assist in controlling the pressure supplied to the instrument with high accuracy. There are two different sized desiccators provided with the instrument that allow users to test different sized test specimen with a single instrument. The device is manufactured with high-quality raw materials and is given a blue and grey finish with a powder coating that makes it corrosion resistant. The device is provided to clients with a user manual and a conformance certificate.
The Scuff tester for Indonesia offered by Presto is one of the most commonly used testing instruments that have been used in packaging industries for testing the quality of printing done on the packaging materials such as printed labels, BOP tapes, packaging boxes, etc. With the help of the device, the manufacturers can ensure the best quality and long life of the printed materials of the packaging materials when they are rubbed against each other. The instrument is designed to comply with all the international standards in mind which imply that instrument is also applicable for any of the international industries.
Presto is one of the leading supplier and exporters for Scuff tester for Indonesia that has been widely used in packaging industries for determining the scuff resistance of the packaging materials. The instrument has simple operation and is provided with a digital timer that helps in the accurate timing of the test cycle. There are additional dead weights supplied with the machine to exert extra weight on the test specimen. The instrument is provided complete with a user manual and conformance certificate traceable to any NABL labs.
Presto’s Peel Strength Tester for Indonesia is one of the best testing instruments for packaging industries as it is used for testing the adhesive strength of the packaging materials and hence ensures their high quality. The device is ideal for testing the peel strength of the materials such as self-adhesive tapes, double sided tapes, BOP tapes and so forth. The instrument is capable of accurate determination of the minimum force that is required for removing an adhesive material from the substrate. The instrument adheres to all the international standards such as ASTM.
Presto is a premium supplier and manufacturer of Peel Strength Tester in Indonesia. The device is widely used in packaging manufacturing industries to test the adhesive strength of the materials used for packaging. The instrument is ideal for finding the minimum force that is required to peel out the self-adhesive tapes from the substrates. The device is provided with a digital peak load indicator which helps in an easy and accurate readout of the test results. In addition to that, the peak load indicator also has the ability to store 9 peak load values that can be used for any future reference.
The instrument is provided with grey and blue color and is supplied with a conformance certificate and an instruction manual.
Presto’s Laboratory Hot Air Oven for Indonesia is one of the best testing instruments that can be used for analysis of the effects of elevated temperature on the properties of different materials when they are subjected to such high temperature for a particular span of time. The instrument is widely used in plastic, medical and rubber industries. The machine adheres to all the international standards such as ASTM, ISO, etc. The device is fabricated with best available materials such as stainless steel, and mild steel hence is ideal for use in even harsh working conditions.
Presto is a major manufacturer and exporter of Laboratory Hot Air Oven for Indonesia. The testing machine offered by Presto is one of the most efficient and accurate testing instruments that are best for analysis of the effects of high temperature on the properties of the materials. The device is built with double walled chambers that are best for insulation. In addition to that, the instrument is also provided with a PID temperature controller which easily controls and monitors the temperature inside the chamber. The instrument also comes with a digital preset timer which allows users to preset the test cycle timings.
The instrument is provided complete with a calibration certificate and a user manual for easy operation and use of the instrument.
PET bottles are used in a variety of industries for packaging of different products. The PET bottles must be perfectly balanced so that they do not trip over again and again. To ensure this, section weight analysis of the PET bottle is performed. For this test, the bottles need to be cut in different sections with accuracy and without deformation. The Hot Wire Bottle Cutter for Indonesia offered by Presto is an ideal instrument that can be used for cutting PET bottles for section weight analysis with high accuracy and without causing any deformation to any of the section.
Presto is a leading supplier of Hot Wire Bottle Cutter for Indonesia and has been providing a highly efficient instrument to the clients for better quality assurance. The device is equipped with high-quality canthal wires for cutting of bottles. The device is also provided with a digital display which helps in easy determination of the heat supplied to the wires. The variable voltage potentiometer provided with the device helps in controlling heat to three levels.
The device is provided complete with a conformance certificate and a user manual for easy understanding of the machine operation.
The Presto’s Edge Crush Tester for Indonesia is an advanced and sophisticated testing instrument that is very helpful for the packaging industries to determine the edge crush of various materials such as paper, cardboard, corrugated boards, and solid fiber boards. The instrument is best for testing the crushing strength of the packaging materials hence ensures the best strength and quality of packaging products delivered to the customers. The device is also used for conducting edge, ring, and flat crush test.
Presto has been supplying best Edge Crush Testers for Indonesia that have been helping the clients in the best quality assurance of their products. The instrument is equipped with a digital peak load indicator which is capable of storing 9 peak load values that can be used for future references. The digital control panel helps in easy operation of the machine. The machine is capable of delivering test results with very high accuracy. There are different fixtures provided with the machine to conduct various tests such as edge crush test, ring crush test, and flat crush test. The base plate of the instrument is made from high-quality mild steel which gives it a long life. The device is given a blue and gray corrosion resistant finish. The device is delivered to the clients along with an instruction manual and a conformance certificate.
Presto’s Dart Impact Tester for Indonesia is one of the most accurate and efficient testing instruments that can be utilized in packaging industries to analyze the quality and strength of the plastic films that are used for packaging of the products. The device is provided with a sturdy design that can provide fast operation and accurate results to the users. The machine is in compliance with all the quality standards such as ASTM.
Presto is one of the most trusted manufacturer and exporter of Dart Impact Tester for Indonesia. The instrument offered by Presto is designed and manufactured with the best quality raw materials and complies with ASTM D 1709. In addition to that, the device is equipped with a digital counter that helps in accurate counting of the number of falls made by the dart during the test procedure. The electromagnetic mechanism used for holding and releasing the dart offers uninterrupted falling of dart for accurate analysis.
The instrument is painted in blue and gray color with duly powder coated which makes it corrosion resistant. There are user manual and conformance certificate provided with the machine that are traceable to any NABL laboratories.
Presto’s Bottle Burst Tester for Indonesia is one of the most competent testing instrument that helps the manufacturers of PET bottles to determine the ability of the PET bottles to bear the high pressure from inside. The PET bottles are subjected to very high internal pressure when they are filled with a pressurized liquid. The PET bottles must be strong enough to bear such high pressure, and this instrument helps in ensuring this.
The device is manufactured by keeping all the testing standards in mind and is designed for easy and simple operation. The device is painted in a blue and grey color which gives it a corrosion free finish.
Presto is a leading supplier and exporter of Bottle Burst Tester in Indonesia that is widely used in PET manufacturing industry for testing the strength of the PET bottles. The instrument is provided with a digital control panel for easy and simple operation. The instrument uses highly pressurized air in place of liquids for better accuracy of test results. Along with that, the device is also provided with a steel casing near the test specimen placement area for the protection of the users.
The device is designed in compliance with all the international standards and is acceptable to international market too. The instrument is given a blue and grey finish which is duly powder coated and corrosion resistant. The equipment is provided with a user manual and a conformance certificate.
The Presto Color Matching Cabinet Spectrum Asia II is highly recommended for laboratories and industries where it is important to maintain color consistency and quality. The equipment provides a standardized environment for evaluation and visual assessment of color.
Metamerism is a phenomenon wherein the test samples appears to match under one light source but seem different when viewed under another light source. In such situations it is highly beneficial to use the Presto Color matching cabinet. The equipment is widely used in the paint and plating industry, besides textile & yarn, plastic, paper and other areas.
The Presto color matching cabinet – Spectrum Asia (Rocker Switch Control) provides faster, closer and accurate color matching solution. It has, thus, been the universally preferred choice for decades.
Presto Stantest designs the best quality Color Matching Cabinet for Indonesia. The primary use of this instrument is to test the color vibrancy of various products for textile, paper and packaging, plastic, paint and plating manufacturers in Indonesia. For visual analysis of color quality of the products and for measuring the color vibrancy (to get the better visual effect), a similar light environment is provided by the testing device.
Three types of Color Matching Cabinets for Indonesia are available according to the continuum of Asia, USA, and Europe.
Presto’s Color Matching Cabinet in Indonesia – Spectrum Asia helps to solve the problem of metamerism in which the sample is kept under observation in a particular light but appears different when observed in various light. Presto’s Color Matching Cabinet is the best testing device and highly effective to solve the problem of metamerism. The testing machine measures the color consistency and products vibrancy specifically for the textile industry, paint and plating industry, paper and packaging industry, plastic industry and many more.
Presto offered highly reliable and standardized Bursting Strength Tester for Indonesia. The testing equipment is primarily used by manufacturers of paper and packaging industries in Indonesia. For manufacturing the final goods, the performance of the products with the quality and strength of the raw material are tested using this testing machine. The quality of various materials can be checked using this instrument such as corrugated boards, paper boards, solid fiber boards, single layered –boards, multi-layered boards and many more. The BS Tester for Indonesia has following five models provided by Presto:
• Analogue Model
• Pneumatic Model
• Digital Model
• Computerized Cum Digital with Pneumatic Clamping
• Computerized Cum Digital with Manual Clamping and
Presto's Bursting Strength Tester for Indonesia – Analogue Model concludes maximum hydrostatic pressure. This is done by applying pressure at an increasing rate via rubber diaphragm that results in collapsing or bursting of the paper material. The exact value of bursting strength provides the exact value of the weight that a box can tolerate to its maximum. The quality of the material can be determined by the value of bursting strength.
Heat Sealer Prima is a consistent tool used to perform sealing on flexible packaging products and other thermoplastic materials using pressure and heat by maintaining high temperatures. A heat sealer is used to measure the heat seal performance of composite films, plastic films such as PP, PE used in packaging different food products such as milk powder, instant noodle, food, washing powder, and drugs.
The Presto (Pneumatic Model laboratory) Heat Sealer is widely used in the plastic industry. The temperature of the Presto Heat sealer is also adjustable. The instrument has been provided with Digital Display and is Microprocessor based.
Both the upper and lower jaws of the Presto Heat sealer are heated separately with separate temperature sensors and controllers. Thus, it is possible to maintain both jaws at different temperatures. It is even possible to switch off one heater, while keeping the other on.
Bursting Strength Tester is a reliable index of measurement of strength and performance of materials like paper, paper boards, corrugated boards and boxes, solid fiber boards, filter cloth, industrial fabric, leather and Rexene. With the help of a bursting strength tester, industries can ensure the best quality of products to their clients. Presto is one of the leading manufacturers of Bursting Strength tester.
Other models available of Bursting Strength Tester are: Digital Model, Pneumatic Model, Computerized Cum Digital Model with Manual Clamping and Computerized Cum Digital Model with Pneumatic Clamping.
The bursting strength of the sample is measured by applying the hydrostatic pressure required for producing rupture of the material, when pressure is applied at a controlled increasing rate through a rubber diaphragm. The value of the bursting strength will give an indication of the maximum weight that may be carried in the box. The quality of Corrugated Boxes is graded based on the value of their bursting strength. The Analogue Bursting Strength Tester is a testing instrument that offers highly reliable and accurate test results.
The force required for bursting or complete rupture of the board is measured through a Digital Indicator. The bursting strength defines the materials quality as compared to the others. Digital Bursting Strength Tester provides a hydraulic load under a rubber diaphragm of a specific area of the sample under test. It can be used to accurately determine the bursting strength of paper, corrugated cardboard, carton box, card board, leather, cloth or synthetic leathers. The bursting strength value is expressed in terms of kg/cm². Presto, one of the leading manufacturers of testing instruments offer wide range of paper and packaging instruments.
Presto Digital Bursting Strength Tester is utilized for measuring the bursting strength of paper/strong paper-board by submitting it to an increasing uniform hydraulic pressure. The procedure involves preparing the specimen for test and mounting the sample between two circular clamps. The specimen is then, tightened with the help of geared handle provided. The increasing pressure (hydraulic) is then applied by the handle. The diaphragm is expanded till the specimen ruptures. The reading on the digital display is the Bursting strength of the given test specimen in kg/cm2. For more details about bursting strength tester contact us.
Presto Melt Flow Index tester is fitted with a Microprocessor based PID Temperature controller, with a temperature range from ambient to 400°C. It has a resolution of 0.1°C and an accuracy of ± 0.1°C. The instrument incorporates a digital presettable timer with a range of up to 59 minutes; 59 seconds and buzzer output. The provision of automatic sample cutting ensures the accuracy and smooth operation.
The equipment is built on a rigid metal base plate to ensure stability during operation. The Presto Melt Flow Index tester is finished in Autumn Gray & Blue combination painting. Further, a bright chrome / zinc plating has been added to impart a corrosion resistant finish. The Instrument comes complete with an instruction manual; Electrical Wiring Diagram & Calibration Certificate traceable to NABL approved Labs.
The Presto Top Load Tester gives the compressive buckling load in digital format. This is a fully automatic motorized model. The Digital display of the Digital Top Load Tester is aesthetically appealing and sophisticated. Further the display is easy to read out and has been provided with Auto Tare (ZERO) set facility and Peak Hold arrangement.
This New Generation fully Automatic Motorized Top Load Tester gives the compressive buckling load in digital format. The load sensor can be calibrated in-house. The bottle needs to be placed in between the inverted concave jaws for zero slip gripping. The Operator switches off the machine on viewing buckling in the Pet bottle.
Top Load Tester is designed to provide Compressive buckling load. The instrument is used for testing the load bearing capacity of the PET containers when subject to an extreme load from the Top direction. It determines accurately the maximum load a PET container can bear without any deformation or failure.
• For compressive buckling load in digital format in PET bottle manufacturing plant
Presto’s Hot Wire Bottle Cutter is a widely used instrument in PET bottle industries. PET bottles are mainly used for packaging of various products such as carbonated drinks, food items and so forth. They are also used for packaging of chemical. The shape and size of the bottles is important for the better safety of the products that are packaged in the bottles. For the best shape and size, it is important to test the weight of every section of the PET bottles individually. This process is called the section weight analysis. For accurate section weight analysis, the individual sections of the PET bottles need to be cut properly and precisely without causing any deformation in the shape of the bottle. The Hot wire Bottle cutter helps in this testing procedure of the PET bottles.
The Presto’s Hot Wire Bottle cutter NXG is designed to easily cut the individual sections of the PET bottles. The capacity of the bottles that can be cut using the instrument ranges from 200 ml to 2000 ml. the maximum diameter of the bottles that can be cut with the hot wire bottle cutter is 110 mm. Each section of the bottles is cut in exact dimensions and not deformation occurs in the shape and size of the bottles during the cutting. After accurate cutting of the sections, each section is weighed on a digital balance for accurate measurement of the weight of the sections. This helps in controlling the manufacturing process for better quality assurance and quality control.
Conditioning chamber is an ideal environmental chamber incorporated with the latest technology, used to create the designated temperature. Presto’s Humidity Chamber has the lowest heat loss ratio due to high quality of insulation with imported glass wool. Chamber has a sealed compressor unit for high speed ‘almost instant’ cooling. Ergonomics and user ease are given a lot of importance while designing the system. It has complete DIGITAL controls.
Conditioning chamber maintains testing samples at a particular temperature and humidity level. The environmental conditions play a crucial role in affecting both the physical and chemical properties of materials and the humidity chamber can conveniently replicate such environmental conditions for testing purposes. Conditioning Chamber is used for textile fabric materials after process completion; the main task of this chamber is to remove the moisture level in the sample. With the help of an efficient humidity chamber, the manufactures can easily ensure the best quality of products delivered to their clients.
Presto offers Polariscope, a highly efficient strain viewer that helps the manufacturers in testing the quality and transparency of the products so that best quality assurance could be ensured to the customers. The working of the Presto’s Polariscope is based on the principle that any change in refractive index is due to different strain distribution and this leads to lower transparency of the material. The testing instrument offered by Polariscope comes in variety of sizes and specifications according to the requirements of the clients
Photoelasticity is a major phenomenon that occurs in PET, Preforms and Glass products. Photoelasticty means the change in the refractive index of the material when there is non-uniform strain distribution throughout the material. Photoelasticity can be a great problem for the manufacturers of PET and glass products as this is great flaw in the quality of the products.
Presto offers two models of Polariscope that are Polariscope Dx and Polariscope computerized. The instruments are manufactured with best quality of materials to provide an extended service life and accurate testing procedures. The testing instrument is provided protection from corrosion and rust with Zinc and chrome plating and has been given a smooth and attractive finish in grey and blue color. The instrument is also provided with an instruction manuals and a conformance certificate that can be traced to any of the NABL approved laboratories.
The Presto salt spray chamber is the most reliable equipment for checking the corrosion resistance of surface coatings when exposed to a salt laden environment. This time-tested product has been specifically designed to assess the rust-proof ability of components to withstand corrosion due to atmospheric conditions. It provides complete flexibility in simulation of real life weathering conditions.
The test temperature in the chamber is user adjustable from ambient to +40°C and is controlled by a PID controller system. The HMI based touch screen installed in the Presto salt spray chamber is a powerful tool that eases the analysis of corrosion resistance for a wide variety of sample types. A special zero corrosion PT 100 sensor is incorporated in the apparatus.
The Presto salt spray chamber is triple walled and is fitted with a glass wool insulation, which ensures that the results are accurate and reliable enough to meet the international standard of testing. The chamber incorporates the latest technology including an Air Regulator which regulates the air flow from 0 to 30 psi.
The Salt Spray Tester is designed as per various international Testing Standards which includes, ASTM B 117 and JIS Z 2371. Other than these features like Automated Air Purging and Online Fog Collection makes it easy for the user to perform an error free test.
Testing Instruments in Indonesia