/
Application / Composite Films Testing Instruments

Composite Films Testing Instruments

Our Valued Clients

Bottle Thickness Gage Magnamike

Magnamike - 8600 - Thickness Gage in Nigeria is a highly portable and reliable bottle thickness gage from Olympus. The instrument is designed to perform non-destructive testing. It is a user-friendly testing machine which is provided

Burst Genie 4.0 Digital

The force required for bursting or complete rupture of the board is measured through a Digital Indicator. The bursting strength defines the material's quality as compared to the others. Bursting Strength Tester Genie 4.0 provides a hydraulic pressure on the sample. In the Presto Bursting Strength Tester, a hydraulic pressure is applied on the sample under test, using a neoprene diaphragm, on a circular area. So, a circular piece of the sample of the corrugated board is used for the test. Widely used in the paper and packaging industries, this Digital Bursting Strength Tester conforms to major global testing standards including ASTM D3786-01, ASTM D3786-80a, IS 1060 Part-1 1987, ASTM D774, ISO 2758, and ISO 2759. Compliance with these standards makes it a reliable choice for manufacturers who need precise quality control and international acceptance of their test results. Its dual test modes for paper and board, along with automatic calculation of bursting factor and pass/fail criteria, make it one of the most advanced solutions for packaging material testing.

Co-efficient of Friction Tester Digital

Coefficient of Friction Tester is a consistent tool to indicate the starting and sliding friction of plastic films and sheets when sliding over itself or other substance at specified test condition.
PCOF-P 3000

Colour Matching Cabinet - CMC - Asia

The Presto Color Matching Cabinet Spectrum Asia II is one of the widely used lab testing instrument in the industries and laboratories where it is important to maintain the color consistency of the products. This color matching machine will provide accurate assessment of colors under standardized environment for evaluation and visual assessment of colors.

Crease Stiffness Tester for Paper

Crease Stiffness Tester is a multi-function stiffness tester, mainly used for measuring cardboard, color box (such as cigarette case cosmetic box) of the indentation force (that is, 90° crease of the rebound force), can also measure a variety of cardboard Bending stiffness is achieved on the same instrument with two measurements: 15° flexing Degrees and 90° crease stiffness.

Crease Stiffness Tester Prima Model

Presto has recently introduced a crease stiffness HMI tester to test the crease resistance and board stiffness of various products like carton board, paper, printing, and packaging materials. The board stiffness and crease recovery are critical in the performance of cartons, especially on high-speed packaging machines and manual folding. The value of crease stiffness is technically important in the folding of carton blanks, most importantly during the release and closure.

Dart Impact Tester - Prima Model

Presto's Dart impact tester - HMI is a high-quality testing instrument, used in different packaging industries, to measure the strength of the plastic films to withstand the various forces levied on it. The instrument is provided with an electromagnetic...

Dart Impact Tester- Aero Series

The Presto Dart Impact Tester is used for determining the impact of a free falling dart on a plastic film. The energy of the falling dart causes the film to fail under specified conditions. The dart has a hemispherical head and is held by a strong electromagnetic dart holder.

In stock

Gloss Meter Tri-angle

The gloss meter is available in different geometries to measure the specular reflection gloss of a surface or a material. The Gloss Meter Tri-angle is used to determine the gloss on a surface and measures the amount of reflected light.

GSM Balance - Digital Model

The Digital GSM balance is one of the highly effective and accurate laboratory testing equipment that is used to measure the weight of materials including paper, paperboard, solid fiberboards and corrugated boxes. This paper gsm checking machine ensures that users can get precise testing results for testing the grammage of products.

GSM Round Cutter - Dx

PRESTO Round Cutter for Grammage GSM Round cutter is useful for precise circular cutting to check the grammage of samples. The sample cutter cuts out a circular specimen of 100? Which is exactly 1 / 100th of a square meter, rapidly and accurately.

Hot Tack Tester - Prima Series

Presto's Hot Tack Tester is an extremely effective testing machine which is used to perform hot tack test and check heat seal performance of laminated films, plastic films, and other packaging products.

Laboratory Heat Sealer - Prima Model - PLHS-22 (150 mm)

Heat Sealer Prima is a consistent tool used to perform sealing on flexible packaging products and other thermoplastic materials using pressure and heat by maintaining high temperatures. A heat sealer is used to measure the heat seal performance of composite films.

Availability: In Stock
Shipping Area: Throughout the world

Laboratory Heat Sealer - Prima Model - PLHS-23 (300 mm)

Heat Sealer is a consistent tool used to perform sealing on flexible packaging products and other thermoplastic materials using pressure and heat by maintaining high temperatures. PRESTO Heat Sealer is manufactured under various Test Standards such as ASTM F 2029.

Laboratory Heat Sealer- Model No. PLHS-24 (500 mm)

Heat Sealer is a consistent tool used to perform sealing on flexible packaging products and other thermoplastic materials using pressure and heat by maintaining high temperatures.

Laminated Peel Testing

Presto manufactures the best quality of Peel, seal or bond testing machine that helps to perform Laminated Peel Testing. The test is performed to measure the actual pressure which is required to separate the coated substances which have been applied to standard test plates under specified conditions from another plate which is provided at a particular angle with particular speed.

Peel & Adhesion Testing

Presto's Peel Adhesion Tester is the best machine which is widely used in paper and packaging industries to perform Peel & Adhesion Testing. This test machine helps to measure the permanence or peel strength...

Peel / Seal / Bond And Adhesion Strength Tester

Presto Adhesion Strength Tester is used to quantify the permanence of adhesion or peel ability of self- adhesive pressure sensitive materials. Peel adhesion is defined as the force required for removing a pressure sensitive coated material.

Peel Bond Strength Digital Tester is a standardized test machine, which is widely used to conduct accurate peel/seal strength test for adhesive materials. Suitable for measuring the stability of adhesives like tape or glue, it is a reliable quality control equipment. It is used for checking the ability of the sample to get peeled off from a surface. The testing equipment is designed and manufactured according to ASTM D903 standard.

Presto Peel Strength Tester has a display screen which is based on a hi-tech microprocessor that converts force applied into numeric values. So, the peel adhesive strength value that is measured can be directly viewed on the screen. Application force is controlled uniformly; this is done in order to ensure equal distribution of pressure, all over the test sample.

Registered Design No. 361206-003
Availability: In stock

Peel / Seal / Bond and Adhesion Tester Digital Cum Computerised Model

Peel Adhesion/Bond/Seal Strength Tester is a consistent tool to quantify the permanence of adhesion or peel ability of a self-adhesive pressure sensitive materials. Used for checking the Peel, Adhesion, Bond, Seal Strength testing for Plastic Films and Foil.

Peel Adhesion of Pressure-Sensitive Tapes

Presto designs and manufactures the best and superior quality of Adhesion Tester for measuring the peel adhesion of pressure sensitive tapes. Peel adhesion strength of the pressure-sensitive tapes is defined as the force which is required to separate the pressure sensitive tapes and coated materials which are applied to the standard test plates under some specific conditions from a certain angle and with a certain speed.

Peel Adhesion Strength Tester

Presto Stantest designs high-quality of the Peel Adhesion Strength Tester to measure the performance and adhesion strength of the self-adhesive materials such as tapes, labels, and many more. The instrument...

Peel Back Tester

Presto's Peel Back Tester is used mainly in paper and packaging industries to test the peel off strength or force required to separate the adhesive materials from the substrates. The instrument is designed as per the standards...

Peel Bond Strength Tester

Presto Stantest provides the best quality of Peel Bond Strength Tester. The instrument is designed in conformance with various test methods that are provided by standardization authorities. The device is used to measure the...

Peel Off Strength Tester

Presto Stantest designs and manufactures high-quality of Peel-off Strength Tester. The instrument is designed to test the permanence of the self-adhesive materials such as tapes, laminates, films, foils and many more...

Peel Resistance Tester

Presto manufactures premium quality of Peel Resistance Tester, which is used to measure the permanence of the adhesion ability of self-adhesive force sensitive products. The adhesion strength of the packaging products is defined as the pressure which is required to separate the coated substrates which are applied to a normal material under some standard conditions. This separation is done from a specific angle and with a particular speed.

Plastic Tensile Testing Machine

The tensile strength of plastic materials means the maximum strength in which it deforms or breaks. The equipment operates on the principle of CRT that is a constant rate of the transverse. The device assists in analyzing the behavior of the material when subjected to a tensile load..

Portable Thickness Gauge Testing

Magna-Mike 8600 is a high quality of portable thickness gauge testing tool from Olympus, which is used to measure the thickness of the PET bottles using non-destructive methodology..

Portable Thickness Gauges

Portable Thickness Gauges for checking the thickness of paper/polyfilms/Textile. Various models with Digital & analogue display are available along with varied Ranges & Least counts.

Puncture Tester for Films

Punctures Testers are widely used to evaluate the rupture or puncture characteristics of a material. This is done by performing a compression test on a material, where the compression is done with the help of a probe...

Scuff & Abrasion Testing

Presto manufactures Scuff Resistance Tester to perform scuff and abrasion testing efficiently and easily. It is the best quality of instrument which is used to test the quality of printed substrates by rubbing the surface of the printed material with another material.

Scuff Resistance Tester

The word scuffing means scraping the surface of a printed substrate or paper material against another object. It is a major property which is used to measure the quality of the print. Presto Stantest..

Scuff Resistance Tester - NXG - Model No. PSR-295

Scuff Resistance Tester is a unique test instrument to determine the color transfer from printed or coated material against rubbing. Scuff resistance testing can reveal how well a material will hold up against abrasion, rubbing, and scratching. This information is critical in industries such as packaging and printing where there is a vast use of labels and other printed materials.

Scuff Resistance Tester - PRIMA SERIES- Model No. PSR - 292 (Prima)

Scuff testing of labels and other printed materials is used to determine their resistance to abrasion, scratching, or rubbing. This type of testing is essential for ensuring that the labels and printed materials can withstand handling and transportation without losing their legibility, durability, or aesthetic appeal.

Scuff Tester- Model No.PSR - 292 Patent No. 336716

The term scuffing is the rubbing of two materials against each other. Scuff Resistance Tester is used to evaluate the rub resistance (i.e. the damage which has taken place through rubbing) of labels and general printed matter.

In stock

Spectrophotometer TP 3100

A color spectrophotometer is an instrument designed for physical sample analysis via full spectrum color measurement.Color spectrophotometers offer a higher level of flexibility and versatility than colorimeters due in part to the fact that they offer multiple illuminant/observer combinations and can operate in multiple geometric arrangements.

Tearing Strength Tester

Tearing Strength Tester is a consistent tool useful to determine the tearing strength of fabrics, plastic films, and similar materials. Tearing Strength Tester is the tensile force required to rupture a pre-slit sample under controlled test conditions.

Tearing Strength Tester- Model No. PTT-560 Prima

Tearing Strength Tester is a consistent tool useful to determine the tearing strength of fabrics, plastic films and similar materials.

Tensile Strength Tester for Adhesive Tapes,

The Tensile Strength Tester for Adhesive Tapes is one of the best product to determine the actual adhesive strength of the tapes..

Tensile Strength Tester for Plastic Films

Presto manufactures the high-quality Tensile Strength Tester for Plastic Films that is used to evaluate the tensile strength of plastic materials used for plastic films..

Tensile Testing Machine Digital

The Tensile testing Machine is highly recommended for evaluating the tensile strength of products and materials. The equipment is based on the Constant Rate of Traverse (CRT) principle. It is equipped with an upper jaw and a lower jaw. Universal Tensile Testing Machine is a reliable piece of equipment which is widely used for checking tensile strength of a product/sample. One of the most common mechanical testing techniques used to determine tensile strength, this is a method wherein controlled tension is applied to a sample until it fully fails.

Thus, the material properties of the sample can be easily determined by this test. It involves measuring the force required to elongate a sample under test to breaking point. Using this test, manufacturers and quality managers are able to determine the core strength of their products.

Registered Design Patent No. 252611
Availability: In stock

TP110 Precision Color Measurement

The Farbung TP110 is a highly used and preferred color measurement instruments in many industries. There are several new features that are added to the product by the highly competent team of engineers and scientists of Presto Stantest.

TP310 Portable Color Measurement

TP310 is a prominent color measurement instruments used in many mainstream industries which have been designed and manufactured by competent engineers and scientists of Presto Stantest. The instrument has many advantages of other international standard color measurement instruments.

Wall Thickness Gauge

Magnamike, manufactured by Olympus, is a premium-quality device renowned for its excellence in conducting wall thickness gauge testing. Offering a non-destructive testing method, this instrument is ideal for measuring the wall thickness of PET bottles. Presto Stantest serves as an authorized dealer for this device.

In stock